Rhodan Trolling Motor Steering Box can break from abuse and also hard normal use. A common problem with the earlier Gen1 motors was steering box gear failure. This was identified and upgraded by Rhodan. These parts listed here are the upgraded ones.

Take note there are different size steering boxes which each have a different sleeve to accept the proper shaft size. Be sure to order the correct one. *These are sold separately and do NOT include any other parts such as the pivot pin, pivot pin c-clips, handle (shown in photo), handle screws! To inquire about these parts contact us. Also contact us or Rhodan factory if in need of a steering box that doesn’t not meet these measurements. *Most new steering boxes DO NOT have the screw holes for attaching the handle.

RMS-SB-MD-118= Fits 1.1875″ Diameter(3.73″ circumference)Shafts – Thisis found on smaller motors and especially earlier versions.

RMS-SB-LG-125 = Fits 1.25″ Diameter(3.927″ circumference) Shafts – This is commonly found on earlier versions medium and large size (72″ and 84″) motors.

RMS-SB-XL-140 = Fits 1.4″ Diameter(4.398″ circumference) Shafts – This is found on most all larger newer motors 84, 96 and 108″.